Current Camso 2020-DTS-129

2020 Camso DTS 129 Base

2020 Camso DTS 129 Base

Swipe to View More

Exterior Colors:

  • Year 2020
  • Make Camso
  • Model DTS 129
Shop Camso Pre-Owned
Product Details Specifications Photos
2020 Camso DTS 129 Base

2020 Camso DTS 129 Base

  • Year 2020
  • Manufacturer Camso
  • Model Name DTS 129
  • Trim Name Base
  • Generic Type (Primary) Snow Bike

2020 Camso DTS 129

All-around performance

The 2020 dirt-to-snow conversion system provides a deep snow performance and a better handling - The best of both worlds - Ride year-round in all types of terrains with the unique single-rail suspension technology and the high-performance track.

  • BIKE INTEGRATION
  • ON-TRAIL HANDLING
  • DEEP SNOW
Features may include:
  • TECHNOLOGY

Designed to integrate your bike's original balance and dynamics, the combination of the cutting-edge track design and the single rail suspension makes the DTS 129 an outstanding performer in deep snow and exceptional handling for hard pack trail riding.

  • SUSPENSION

Camso have re-defined the suspension geometry to provide a smoother and responsive ride, especially when you make the leap from trail to deep snow.

  • SKI DESIGN

The unique front ski design gives you stable and predictable handling. Enjoy smooth side-to-side transitions with the angle side keel featuring a replaceable blade. Save your front forks from high-impact with Camso’s polymer ski mount.

  • NEW BRAKE SYSTEM

Our pre-bled brake system is now 33% more powerful, and it comes from the factory with a 11 mm master cylinder calibrated for snow bike application, giving a progressive and smooth brake feel. Reduced installation time without bleeding needed.

  • CHASSIS & DRIVE TRAIN

Integrated naturally with the motocycle, the chassis and subframe are built with strong steel components to maintain frame rigidity and prevent damage from potential impact. A lighweight dual chain tensionner that allows for the primary and secondary chains to be adjusted individually.

Drivetrain

Chain Type Slider: Primary and secondary drive nylon chain guide | Case: Sealed Regina 520 (continuous) | Drive: Sealed Regina 520 (master link) | Tensioner: Oil bath bearing dual chain tensioner. Slide and pivot
Sprocket Chain Drive Shaft: 17 tooth w/ splined axle | Upper chain case: 15 tooth w/ splined axle | Lower chain case: 19 tooth w/ splined axle

Chassis

Chassis Side panel: All aluminium reinforced with square panel guard | Strut rod: Aluminium rod with compliant rubber mount
Mainframe Tubular steel frame with Strenx® reinforcements

Suspension

Suspension Rail: Aluminium reinforced polymer single beam suspension
Shock Absorber and spring: Single torsion spring and gaz shock absorber
Front Travel (in./cm.) 12.0 in (30.5 cm)
Rear Travel (in./cm.) 12.0 in (30.5 cm)

Brakes

Brake System Type New Hayes V32 – Dual piston caliper, shielded rotor with anti-rattle pad clip

Dimensions

Dimensions Track driver: 7 tooth x 2,86 double internal drive
Length Front Ski: 1092.2 mm | Rear Suspension: 1752.6 mm
Width Front Ski: 304.8 mm | Rear Suspension: 381 mm
Track Height 63.5 mm
Track Width 317.5 mm
Track Length 3276.6 mm
Overall Length Front ski: 43 in (1100 mm) | Rear suspension: 69 in (1750 mm)
Overall Width Front ski: 12 in (305 mm) | Rear suspension: 15 in (385 mm)
Track (WxLxH in.) 12.5 in x 129 in x 2.5 in

Weights

Weight Front Ski: 9.1 Kg | Rear Suspension: 61.2 Kg
Estimated Dry Weight (lbs./kgs.) Front ski: 20 lb / 9 kg | Rear suspension: 135 lb /61 kg

Features

Ski Type Camso multiple keel snow bike ski | Upright: Polymer compliant upright with pivot point integrated at the keel level
Features Wear bar: Inner 60° STUD BOY® shaper bar carbide / Outside sharpened high-strength steel | Front and rear fitment: CNC machined aluminium bushing and plates | Cargo storage: Integrated storage zone with anchor point | Installation time: < 2 hr | Subsequent: < 1 hr

Product Photography