RM Nadeau Equipments
Our stores
Sherbrooke
534 Rue du Parc-Industrie,
Sherbooke
QC J1C 0J2
819-846-6828
Coaticook
543 Rue Main O
Coaticook,
QC J1A 1R2
819-742-6828

Series
DM2000

Disc Mowers

INTRODUCTION

Kubota's DM2000 Series disc mowers features a 7'10"-10'6" working widths, Kubota's exclusive Non-Stop BreakAway System for cutterbar protection, and large 35° working angle.

Features

Three-bladed Discs
With three blades per disc, Kubota mowers provide a 50% higher cutting frequency compared to conventional solutions. This means a third less load per blade, an even load on the drive, smoother power usage, and produces a neat, cleanly cut stubble.
Fully Welded Cutterbar
The Kubota cutterbar’s high cooling and lubrication efficiency oil pump system reduces wear and tear. The fully welded cutterbar with overlapping C-channels makes for a very strong design requiring low maintenance with no risk of loose bolts.
Counter-Rotating Discs
All Kubota mowers have an even number of counter-rotating discs. Apart from the immediate crop transport to the rear this system ensures that even in wet conditions no stripes of uncut forage are left in the field.
Low Noise Cutterbar
The Kubota cutterbar is designed for low maintenance and offers virtually quiet operation - Convenient during a long and busy work day.
Vertical Transport Position
When in transport, the mowers are folded to a vertical position well behind the tractor. The center of gravity is close to the tractor, which ensures excellent weight distribution and transport stability.
Non-Stop BreakAway Protection
If hitting an obstacle the Non-Stop BreakAway system will be activated and swing the machine backwards and over the obstacle and then return it to the original working position. No need to stop – no time lost.
Fast Lifting on Headland
The mower is easily lifted via a hydraulic cylinder without activating the tractor’s 3pt linkage. The advantage is less wear on tractor and machine, as the PTO stays in the same position, minimizing vibrations in the transmission.
35° Working Angle
The DM2000 can pivot 35° up and down by simply operating the tractor hydraulics to ensure efficient ground contour.
DM2000

MODELS

DM2024
DM2024
Type
Rear-Mounted
Horsepower (min.)
46.0 HP
PTO
540 rpm
Cutting Width
7'10" (2.4m)
REQUEST A QUOTE
DM2028
DM2028
Type
Rear-Mounted
Horsepower (min.)
50.0 HP
PTO
540 rpm
Cutting Width
9'2" (2.8m)
REQUEST A QUOTE
DM2032
DM2032
Type
Rear-Mounted
Horsepower (min.)
55.0 HP
PTO
540 rpm
Cutting Width
10'6" (3.2m)
REQUEST A QUOTE

Brochure

DM2000 Series
Download PDF
Three-bladed Discs
With three blades per disc, Kubota mowers provide a 50% higher cutting frequency compared to conventional solutions. This means a third less load per blade, an even load on the drive, smoother power usage, and produces a neat, cleanly cut stubble.
Fully Welded Cutterbar
The Kubota cutterbar’s high cooling and lubrication efficiency oil pump system reduces wear and tear. The fully welded cutterbar with overlapping C-channels makes for a very strong design requiring low maintenance with no risk of loose bolts.
Counter-Rotating Discs
All Kubota mowers have an even number of counter-rotating discs. Apart from the immediate crop transport to the rear this system ensures that even in wet conditions no stripes of uncut forage are left in the field.
Low Noise Cutterbar
The Kubota cutterbar is designed for low maintenance and offers virtually quiet operation - Convenient during a long and busy work day.
Vertical Transport Position
When in transport, the mowers are folded to a vertical position well behind the tractor. The center of gravity is close to the tractor, which ensures excellent weight distribution and transport stability.
Non-Stop BreakAway Protection
If hitting an obstacle the Non-Stop BreakAway system will be activated and swing the machine backwards and over the obstacle and then return it to the original working position. No need to stop – no time lost.
Fast Lifting on Headland
The mower is easily lifted via a hydraulic cylinder without activating the tractor’s 3pt linkage. The advantage is less wear on tractor and machine, as the PTO stays in the same position, minimizing vibrations in the transmission.
35° Working Angle
The DM2000 can pivot 35° up and down by simply operating the tractor hydraulics to ensure efficient ground contour.