RM Nadeau Equipments
Our stores
Sherbrooke
534 Rue du Parc-Industrie,
Sherbooke
QC J1C 0J2
819-846-6828
Coaticook
543 Rue Main O
Coaticook,
QC J1A 1R2
819-742-6828

Series
M6-1

Utility Tractors

INTRODUCTION

Introducing the M6-1 Series of deluxe mid-size tractors redesigned for operator comfort, smooth operation and maximum efficiency. Ideal for hay and livestock operations, this series provides an intuitive experience of simplified machine operation.

Features

New Loader Joystick
Redesigned for maximum comfort, the all new loader joystick fits perfectly in your hand while also being positioned closer to the operator for easier operation. The joystick also features transmission controls for changing the direction of the tractor, as well as the ability to shift up and down through the powershift gears. The operator has full control of the tractor with one hand on the wheel and one on the joystick.
Xpress Restart
With the new Xpress Restart, driving has never been easier so beginners can move as quickly as the pros. This feature gives the operator the ability to come to a stop using only the brake, no clutch pedal required.
Stationary PTO
Operators can run the rear PTO from both inside or outside the cab. This feature is great for your busy operator using grain augers, feed mixers and more.
Shuttle Shift Modulation
Enjoy a smoother operation with the ability to adjust the shuttle sensitivity. Adjust the setting based on weight of loads and choose how aggressive the transmission shifts between forward and reverse for maximum efficiency.
Grand X Cab
Discover freedom from within. The M6 boasts one of the largest cabs in its class. We removed the center pillars and rounded the glass increasing both interior height and width to provide a more spacious feel. Wide-opening doors provide easier access while the unobstructed ceiling and fully flat floor guarantee more head- and legroom for a higher level of comfort even during long hours behind the wheel.
Intelli-shift transmission
All four models of M6 tractors feature Kubota’s 24 Speed Intelli-Shift transmission and an optional creep gear for a total F32/R32. The Intelli-Shift transmission features 8 powershift gears and 3 ranges Hi, Mi, and Low. Simply shift up or down in gears from the touch of a button, which is located on the shifting lever or conveniently on your deluxe armrest. With the powershift buttons and the range lever incorporated together, finding the right gear for field work or travel is simplified.
Bevel-gear front axle
Another Kubota exclusive, the bevel-gear front-wheel drive enables the tractors to achieve a tight turning radius, thanks to a generous 50˚ wheel-turning angle, enabling easy handling in varying conditions. The bevel gear design eliminates open U-joints and all components are hermetically sealed in oil.
Work Kruise
The M6 Series engines feature an electronic governor that electronically keeps the engine revolution constant, preventing drops in PTO speed and enabling stable operation. Used with the transmission’s Auto Mode feature, Work Kruise makes working with PTO-driven implements much more efficient. RPM Dual Memory With the press of a button, you can now pre-set and save up to two frequently used engine RPM settings. So whether you have a favorite setting for PTO work, front loader work, or changing directions, your Kubota runs just the way you want, without having to adjust the throttle.
Hydraulic system
For smooth implement handling and extra speed of front loader and rear implement operations, M6 Series tractors come equipped with gear-type hydraulic pumps. An external hydraulic cylinder improves lifting force and eases maintenance, while the adoption of an unload valve minimizes loss to hydraulic pressure to exert greater power during PTO operations when the 3-point hitch is not in use. Hydraulic Flow Valves and Auxiliary Control Valve: To ensure faster loader cycle times and instantaneous implement response, M6 Series tractors have high-flow, 18.7 gpm (M6-101/M6-111) and 20.4 gpm (M6-131/M6-141) hydraulic pump. Two remote valves come standard—an SCD/Self-Canceling Detent and FD/Float-type valve. The maximum installation is 4 valves.
Individual flow control valve
The standard individual flow control valve allows the hydraulic flow to be adjusted independently for up to 4 auxiliary control valves so each valve together or the valves and 3-point hitch can be operated simultaneously. The oil flow rate is easily regulated by adjusting each flow control dial.
Auto 2WD
Select the Auto 4WD mode, and your M6 tractor automatically switches from 4WD to 2WD when the traveling speed exceeds 12.5mph (20km/h). 4WD will re-engaged when the traveling speed falls below 10.5mph (17km/h). Auto 4WD not only lets you move smoothly at high range, but also saves fuel and reduces tire wear.
Front hitch & PTO (optional)
Performance matched front 3-pt hitch and more versatility, providing the ability to attach front mount implements such as snow blowers and blades.
M6-1

MODELS

M61011
M6-101-1
Horsepower (Rated Engine):
104.5 HP
Horsepower (PTO):
82.0 HP
Operator Platform:
Cab
Transmission:
Intelli-shift
REQUEST A QUOTE
M61111
M6-111-1
Horsepower (Rated Engine):
114.1 HP
Horsepower (PTO):
92.0 HP
Operator Platform:
Cab
Transmission:
Intelli-shift
REQUEST A QUOTE
M61311
M6-131-1
Horsepower (Rated Engine):
131.6 HP
Horsepower (PTO):
104.0 HP
Operator Platform:
Cab
Transmission:
Intelli-shift
REQUEST A QUOTE
M61411
M6-141-1
Horsepower (Rated Engine):
141.4 HP
Horsepower (PTO):
114.0 HP
Operator Platform:
Cab
Transmission:
Intelli-shift
REQUEST A QUOTE

Brochure

M6-1 Series
Download PDF
New Loader Joystick
Redesigned for maximum comfort, the all new loader joystick fits perfectly in your hand while also being positioned closer to the operator for easier operation. The joystick also features transmission controls for changing the direction of the tractor, as well as the ability to shift up and down through the powershift gears. The operator has full control of the tractor with one hand on the wheel and one on the joystick.
Xpress Restart
With the new Xpress Restart, driving has never been easier so beginners can move as quickly as the pros. This feature gives the operator the ability to come to a stop using only the brake, no clutch pedal required.
Stationary PTO
Operators can run the rear PTO from both inside or outside the cab. This feature is great for your busy operator using grain augers, feed mixers and more.
Shuttle Shift Modulation
Enjoy a smoother operation with the ability to adjust the shuttle sensitivity. Adjust the setting based on weight of loads and choose how aggressive the transmission shifts between forward and reverse for maximum efficiency.
Grand X Cab
Discover freedom from within. The M6 boasts one of the largest cabs in its class. We removed the center pillars and rounded the glass increasing both interior height and width to provide a more spacious feel. Wide-opening doors provide easier access while the unobstructed ceiling and fully flat floor guarantee more head- and legroom for a higher level of comfort even during long hours behind the wheel.
Intelli-shift transmission
All four models of M6 tractors feature Kubota’s 24 Speed Intelli-Shift transmission and an optional creep gear for a total F32/R32. The Intelli-Shift transmission features 8 powershift gears and 3 ranges Hi, Mi, and Low. Simply shift up or down in gears from the touch of a button, which is located on the shifting lever or conveniently on your deluxe armrest. With the powershift buttons and the range lever incorporated together, finding the right gear for field work or travel is simplified.
Bevel-gear front axle
Another Kubota exclusive, the bevel-gear front-wheel drive enables the tractors to achieve a tight turning radius, thanks to a generous 50˚ wheel-turning angle, enabling easy handling in varying conditions. The bevel gear design eliminates open U-joints and all components are hermetically sealed in oil.
Work Kruise
The M6 Series engines feature an electronic governor that electronically keeps the engine revolution constant, preventing drops in PTO speed and enabling stable operation. Used with the transmission’s Auto Mode feature, Work Kruise makes working with PTO-driven implements much more efficient. RPM Dual Memory With the press of a button, you can now pre-set and save up to two frequently used engine RPM settings. So whether you have a favorite setting for PTO work, front loader work, or changing directions, your Kubota runs just the way you want, without having to adjust the throttle.
Hydraulic system
For smooth implement handling and extra speed of front loader and rear implement operations, M6 Series tractors come equipped with gear-type hydraulic pumps. An external hydraulic cylinder improves lifting force and eases maintenance, while the adoption of an unload valve minimizes loss to hydraulic pressure to exert greater power during PTO operations when the 3-point hitch is not in use. Hydraulic Flow Valves and Auxiliary Control Valve: To ensure faster loader cycle times and instantaneous implement response, M6 Series tractors have high-flow, 18.7 gpm (M6-101/M6-111) and 20.4 gpm (M6-131/M6-141) hydraulic pump. Two remote valves come standard—an SCD/Self-Canceling Detent and FD/Float-type valve. The maximum installation is 4 valves.
Individual flow control valve
The standard individual flow control valve allows the hydraulic flow to be adjusted independently for up to 4 auxiliary control valves so each valve together or the valves and 3-point hitch can be operated simultaneously. The oil flow rate is easily regulated by adjusting each flow control dial.
Auto 2WD
Select the Auto 4WD mode, and your M6 tractor automatically switches from 4WD to 2WD when the traveling speed exceeds 12.5mph (20km/h). 4WD will re-engaged when the traveling speed falls below 10.5mph (17km/h). Auto 4WD not only lets you move smoothly at high range, but also saves fuel and reduces tire wear.
Front hitch & PTO (optional)
Performance matched front 3-pt hitch and more versatility, providing the ability to attach front mount implements such as snow blowers and blades.