RM Nadeau Equipments
Our stores
Sherbrooke
534 Rue du Parc-Industrie,
Sherbooke
QC J1C 0J2
819-846-6828
Coaticook
543 Rue Main O
Coaticook,
QC J1A 1R2
819-742-6828

Series
WR1400

Wrappers

INTRODUCTION

With its low profile design, Kubota's WR1400 round bale wrapper efficiently works to better preserve your quality silage and hay. Choose between manual-cable or computer controlled versions, both equipped to handle bales up to 2,650 pounds and 47" X 50" in size. Quality bales start here - forage forward with Kubota.

Features

Turntable principle
The Turntable with two driven rollers are designed for high bale stability and smooth even rotation. This ensures consistent bale rotation even in the most difficult of conditions.
Pre-stretch unit
Specially designed aluminum rollers for perfect film pre-stretch. 70% Stretch ratio fitted as standard with fast exchange of film roll. The film locking device is easy to operate with one hand.
Hydraulic film cutter
Simple hydraulic film cut and hold device, fully automatic: no action from driver needed. Perfect cutting of the film in all conditions with easy change and adjustment of the knife ensuring the perfect holding even in wet conditions.
Extendable wheel arm
To allow for increased stability during bale loading, an extendable wheel arm was incorporated into the frame design. This allows bales up to 2,650 lbs. to be loaded without any counter weight on the machine.
Clever wheel construction
For narrow transport width, the right hand wheel is turned to the inside of the support arm. This allows for maximum stability during work. It takes only a few seconds to convert from transport to working position by lowering the loading arm hydraulically to lift the wrapper, and the wheel is easily turned into transport position.
Gentle unloading
Wide spaced wheels allow for an exceptionally low turntable height. This design allows the table to be tilted downwards until it nearly touches the ground, reducing drop height when unloading bales. This provides the gentlest possible handling of wrapped bales. It reduces the chance of film damage and eliminates the need for a fall damper or drop mat.
WR1400

MODELS

WR1400C
WR1400C
Hitch Type:
Pull Type
Weight:
1,653 lbs
Bale Size:
47x60"
REQUEST A QUOTE
WR1400M
WR1400M
Hitch Type:
Pull Type
Weight:
2,249 lbs
Bale Size:
47x60"
REQUEST A QUOTE

Brochure

WR1400 Series
Download PDF

Manual

Operator's Manual - WR1400
Download PDF
Turntable principle
The Turntable with two driven rollers are designed for high bale stability and smooth even rotation. This ensures consistent bale rotation even in the most difficult of conditions.
Pre-stretch unit
Specially designed aluminum rollers for perfect film pre-stretch. 70% Stretch ratio fitted as standard with fast exchange of film roll. The film locking device is easy to operate with one hand.
Hydraulic film cutter
Simple hydraulic film cut and hold device, fully automatic: no action from driver needed. Perfect cutting of the film in all conditions with easy change and adjustment of the knife ensuring the perfect holding even in wet conditions.
Extendable wheel arm
To allow for increased stability during bale loading, an extendable wheel arm was incorporated into the frame design. This allows bales up to 2,650 lbs. to be loaded without any counter weight on the machine.
Clever wheel construction
For narrow transport width, the right hand wheel is turned to the inside of the support arm. This allows for maximum stability during work. It takes only a few seconds to convert from transport to working position by lowering the loading arm hydraulically to lift the wrapper, and the wheel is easily turned into transport position.
Gentle unloading
Wide spaced wheels allow for an exceptionally low turntable height. This design allows the table to be tilted downwards until it nearly touches the ground, reducing drop height when unloading bales. This provides the gentlest possible handling of wrapped bales. It reduces the chance of film damage and eliminates the need for a fall damper or drop mat.